CO2 Fractional Laser Scar Pigment Removal Vaginal Tightenin Device
Specifications
| Working mode | single pulse, continuous pulse, repeated pulse, ultra pulse |
| Output power | 0-60W(adjustable) |
| Input power | 450VA |
| Laser type | Sealed-off CO2 laser |
| Laser wavelength | 10.6μm |
| Divergence angle | 4mrad |
| Focused spot diameter | ≤0.4mm |
| Tool bit focus | F=100mm(optional) |
| Pulse width | 0.1ms-10ms |
| Aiming beam | Red diode laser(650nm, 2mW) |
| Transmission system | Spring-balanced 7 joint arms |
| Cooling system | Inside-circle coolant |
| Display screen | 12.1 color touch screen |
| Working environment temperature | 5-40ºC |
| Humidity | <80% |
| Air pressure | 86Kpa-106 Kpa |
| Input power | AC220V±10%, 50Hz |
| Preheating-time | >5min |
| Electromagnet | No electromagnet interrupt |
| other working environment | No obvious shaking or airflow |
| N. W./G.W | 39kgs/56kgs |
| Pack size | 116 ×56×47cm |
Principle of CO2 fractional laser machine
The wavelength of CO2 laser is 10.6μm, which can be fully absorbed by human biology tissue (all the skin are available). The sealed-off fractional CO2 laser, whose output laser-light will be transferred by articulated arm, which has better sense of direction and higher energy density.
The CO2 laser operates in the invisible infrared waveband, and an aiming beam is required to see where the treatment beam will impact tissue more recently from a visible red diode laser. When the laser beam go through the focus lens, the produced heat will gasify the target tissue.
With fractional laser resurfacing the laser beam is broken up or fractionated into many small micro beams which are separated so that when they strike the skin surface small areas of the skin between the beams are not hit by the laser and left intact. These small areas of untreated skin promote a much more rapid recovery and healing with less risk of complications. The small areas treated by the fractional micro beams, called micro treatment zones, cause sufficient laser injury to promote new collagen production and resultant facial skin rejuvenation.
Applications of CO2 fractional laser machine
Skin resurfacing (Rough skin, coarse pores, dark skin, light damage…)
Wrinkles (Crow's feet, head lines, Sichuan characters, Decree lines)
Pigmented nevus, epidermal pigmentation (freckles, etc.), epidermis (all kinds of warts) cutting
Scar Repair (acne scar, hypertrophic scar, burn scar, sunken scar, etc.)
Other applications (syringoma, condyloma, seborrheic, etc.)
Viginal care (Vaginal wall tightening, collagen remodeling, thicker and more resilient, labium whitening)
Advantage of CO2 fractional laser machine
1.Easy Drawing regular & irregular shapes for different area treatment
2.Ultra-Short Pulse Duration make sure safety and comfortable treatment
3.Various indications with one machine
4.Adjustable spot density to meet versatile treatment
5.Easy setup and quick treatments
|
|
Co2 Laser Machine Laser Co2 Fractional Skin Resurfacing Machine Images
|
